Fix power up problem on Galaxy S2 i9100 boot loop when plugged

During the past four hours I was up to the highest levels of stress and for what, for a damn charge chip of a Samsung galaxy S2 i9100, tried to install every kernel and every ROM even start thinking to throw it on the trash ! And that's why first thing that come into my mind after resolving this issue is to put it on my blog to help other not loosing much time from their day.

So if you have these conditions on your Galaxy S2 :
  • Galaxy S2 don't boot and you can't power it up.
  • Your Galaxy i9100 keep showing the charge icone while booting in loop when in charging or connected to PC.
  • You cant get into the recovery mode.
  • You can only get into the Download mode. 
Then this tutorial is just for you, this for sure work for other version like i9100G or P, and other similar Samsung Galaxy smartphones.
 
The solution is very simple and stupid that made me when I first found it want to throw that Galaxy S2 on my room wall.



So to fix this error I advise you, first thing first is to RELAX, relax and then relax, don't think about hard brick or soft brick or any JIG tool, it's very simple, just do the following:


  • Remove the battery.
  • Wait for 10min.
  • put it back and press power on button.
  • It will boot !!
This is the easiest and stupidest tutorial I ever made but it will get you out of mind blowing moments :)
At any cases if this doesn't help you I still can give you some helps, just leave a comment bellow.

If you like this article, please share it on facebook, tweet it and +1 it to spread it :) !
Fix power up problem on Galaxy S2 i9100 boot loop when plugged Fix power up problem on Galaxy S2 i9100 boot loop when plugged Reviewed by Mhr on 21:51 Rating: 5

No comments

No Backlinks please, Comments are under moderation !