DELL inspiron USB 3.0 Driver for Windows 7, SM Bus Controller and card reader drivers

Another lost driver I wan to share with you guys, this time the driver is the USB 3.0 for the DELL inspiron N5110 Windows 7.

The new generation of DELL inspiron laptop come with the USB 3.0 chipset inside with a Hardware ID "PCI\VEN_104C&DEV_8241&SUBSYS_04B01028&REV_02" refering to the Wistron USB3.0 controller, so to get the driver installed just download the file bellow and install it.



Update:
Wistron USB3.0 Texas Instruments XHCI Contoller 
HWID: PCI\VEN_104C&DEV_8241&SUBSYS_35001558

SM Bus Controller Cypress Trackpad driver by DELL:
HWID: PCI\VEN_8086&DEV_1C22&SUBSYS_35001558&REV_05

Base system device JMicron card reader
HWID: PCI\VEN_197B&DEV_2392&SUBSYS_35001558&REV_90

JMicron Card Reader driver2
HWID: PCI\VEN_197B&DEV_2393&SUBSYS_35001558&REV_90
  • Download


    If you like this article, please share it on facebook, tweet it and +1 it to spread it :) !
    DELL inspiron USB 3.0 Driver for Windows 7, SM Bus Controller and card reader drivers DELL inspiron USB 3.0 Driver for Windows 7, SM Bus Controller and card reader drivers Reviewed by Mhr on 16:56 Rating: 5

    16 comments

    1. thanks you very much...problem solved

      ReplyDelete
    2. Nice to hear that ! You are welcome :)

      ReplyDelete
    3. damn i have problem with my USB ports. i have now working only one port . and other two not. they say unpluged and Texas Instruments Root Hub won't work.

      ReplyDelete
    4. Hello, just give le the Hardware ID of the device and I will get you the driver ;)

      ReplyDelete
    5. i have Dell inspirion N 5110 windows 7 64bit on laptop. but self usb shows that texas instruments Root Hub with yellow and in properties it says this :

      This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

      ReplyDelete
    6. Hello again, first try to remove/install the driver if you have it, if that dont help, give me the Hardware ID of the device in yellow in your device manager and I will bring you the working driver, and if you dont know how to get the HW ID just follow the picture bellow

      http://www.askdrtech.com/solutions/image.axd?picture=2010%2F3%2Fhardware-id-02.jpg

      ReplyDelete
    7. USB\TIUSBD_Hub&VID_040E&PID_0100&REV_0000
      here it is.

      ReplyDelete
    8. Hello again, please try this driver and report back your situation :
      http://www.mediafire.com/?0422tjuko434xgf

      ReplyDelete
    9. Thank you friend! That driver helped me . Thanks one more time . :)

      ReplyDelete
    10. arijit20:36

      is there any 3.0 usb driver for N5110 inspiron,dell for win8..can any one help me out..

      ReplyDelete
    11. just give me the Hardware ID of the device :)

      ReplyDelete
    12. s2053770906:59

      hi Maher

      When i try to install the SM Bus Controller Driver(SM Bus Controller Cypress Trackpad driver by DELL:

      HWID: PCI\VEN_8086&DEV_1C22&SUBSYS_35001558&REV_05), my keypad and trackpad gets disabled, then i have to do system restore to get my keypad working.

      ReplyDelete
    13. hello,

      please try this one : http://ftp.dell.com/FOLDER01202353M/2/Touchpad_Synaptics_W84_X13_A03_Setup-8988H_ZPE.exe

      ReplyDelete
    14. nawaz03:20

      USB\VID_0BDA&PID_0129&REV_3960

      ReplyDelete
    15. nawaz03:22

      card reader not working, thats the hardware id

      ReplyDelete
    16. Jess14:59

      Thank you soooooooo much!!! was doing my head in with the drivers and your link worked straight away! Love you!!!!! =D

      ReplyDelete

    No Backlinks please, Comments are under moderation !